Nodyn:Data China
![](http://upload.wikimedia.org/wikipedia/commons/thumb/f/fa/Flag_of_the_People%27s_Republic_of_China.svg/150px-Flag_of_the_People%27s_Republic_of_China.svg.png)
This template contains various independently retrievable data items about China in the form of parameter values of a variable template of choice, in a standardized fashion. It is a member of a family of templates, those with names starting with "Data" in Category:Data templates. The system used is similar to that of Wikipedia:WikiProject Flag Template. The corresponding template of that project is Template:Country data China.
Parameters
[golygu cod]Parameter name | Value | Meaning |
---|---|---|
1
|
China |
last part of template name, used to identify it within the family of templates[1] |
article |
article name; needs to be specified only if it differs from China ; in applications, use [[{{{article|{{{1}}}}}}]] to link to the article (as has been done at the top of this page)
| |
short name |
shorter display name to be used in some contexts; an application or application parameter can specify whether this is used; only intended for dispensing with disambiguation in a context where it is not needed | |
type |
country |
type of entity, e.g. continent, country, province, municipality |
code |
code | |
code description |
code description | |
continent |
Asia |
continent, if type is lower than "continent" |
country |
country, if type is lower than "country" | |
province |
province, if type is lower than "province" | |
popbase
|
1,360,720,000
|
population on a given date (stored without commas) |
popbaseyear
|
2013
|
year for which the population base figure applies |
popbasemonth
|
12
|
month for which the population base figure applies |
popbaseday
|
31
|
day for which the population base figure applies |
popinc
|
18301
|
population increase per day; used to extrapolate the population figure |
land area
|
9,326,410
|
land area in km2 (stored without commas) |
total area
|
9,640,821
|
total area in km2 (stored without commas) |
flag image
|
Flag of the People's Republic of China.svg
|
name of the flag image (or other illustration, if there is no flag) shown above |
Throughout the family of templates, fixed names are used for the parameters. (The parameter names are kept short to reduce counts for the post expand include size and the template argument size in cases where these are applicable.) However, not necessarily all parameters have been given a value: some parameters may not be applicable, while for some other parameters the value may just have not been specified yet. The table shows all parameters, and for each the value, if specified.
Related data templates
[golygu cod]
Derived data
[golygu cod]The population today is Gwall mynegiad: Heb adnabod y nod atalnodi "["..[2]
The population is Nodyn:Ppm of that of the world. It is Gwall mynegiad: Heb adnabod y nod atalnodi "[".% of that of Asia.
The total area is 9,640,821 square kilometre (3,722,342 mi sgw). It is Nodyn:Ppm of the land area of the world. It is Gwall mynegiad: Heb adnabod y nod atalnodi "[".% of that of Asia.
The water area is 3.3% of the total area.
The population density is 153.5 per square kilometre (397.6/mi sgw) land area.
Retrieval of data items
[golygu cod]{{data China|pst2|land area}}
, using parameter selection template Template:Pst2, gives the parameter land area, etc.
For retrieval of more data items it is more efficient to prepare a template for that, to be used as follows:
{{data China|
template name|..|..|..|..}}
so that this data template needs to be called only once.[3] The default template is Template:Show data, producing this page.
The four parameters are optional, they are passed on to the prepared template as parameters 2-5.
Special templates:
- Template:Linkd - link to article
- Template:Poptoday - used above
- Template:Popdens - for use on the page List of sovereign states and dependent territories by population density
- Template:Poptoday 1 - for use on the page List of countries by population
- Template:Popareadens - for use on the page List of countries by population
A parameter being undefined or empty typically means the same, see below. {{data ..|pst2|..}}
gives the empty string and the text "{{{..}}}
", respectively. Therefore an application checking the parameter has to check both. Checking whether a result is equal to e.g. the text "18301
" cannot be done directly with #ifeq in a template which itself has also a parameter with that name, because if that is defined, there would be a comparison with the value instead of the text itself. Instead, it can be checked whether the first character of the result is "{
", e.g.: {{#ifeq:{{padleft:|1|{{data {{{continent}}}|pst2|popinc}}}}|{|..|..}}
.
Creating new data templates
[golygu cod]Template:Data/preload can be used to create new data templates. On the page of the data template of a province, if there is no data template yet for the country, a link appears to create that, preloading this template. Otherwise the wikitext can be copied to the new data template. For parameters which are not applicable, such as country for a country, the parameter definition "country=" can be deleted. For parameters to be filled in later the parameter definition like "popinc=" (specifying the empty string as value) can be left in the wikitext to be filled in later. Do not forget parameter 1.
Efficiency
[golygu cod]In this template system each template contains various properties of a single entity, as opposed to the other common system, where a template contains one property (e.g. population or area) of many entities. Although that other system can be convenient if updates of a property for all these entities become available together, in the case of large-scale use of data on one page that other system can be problematic due to its inefficiency. This is because of the following:
- There are often more entities than properties, and page counts (or in the case of
#switch
, average page counts) are proportional to the number of data items in the data template (if they are stored in a linear way, not in a tree, and not stored as unnamed parameters). - In the case of large-scale use of data on one page there are usually one or more tables, where an entity forms a row and a property a column, because there are often more entities than properties, and because this way the sorting feature allows sorting entities based on a property. In this template system this allows producing a row with only one call of the data template, making the count not grow faster than proportional to the average number of data items stored per data template, times the number of entities in the table.
The include part of the data template of an entity does not contain a long list of its sub-entities or their properties, because that would make this method inefficient too.
- ↑ It may seem odd, but a template cannot retrieve its own name (PAGENAME only provides this on the template page itself), and even if it could, a string operation would be needed to remove "Data ". Putting the name of the entity in the data template removes the need to supply it as a parameter when the data template is called (in the cases that it would need this name).
- ↑ Estimated by extrapolation.
- ↑ See the first two rows of the first table in m:Help:Array#Summary of counts for template limits.
Until here the documentation is automatically generated by Template:Show data.